Inventory Unit Detail
2012 Yamaha F115 In-Line
$7,999.00
Key Features
New/Used Used
Usage592 Hours
Availability
In Stock
LocationShort's Marine
Stock #
6M2219
VIN
68VX1140624
Condition
Good
Product Features
Dealer Notes
Used 2012 Yamaha 115HP 4 Stroke Outboard 25" Shaft. Prop and controls are not included unless pictured. All used motors are sold "As-Is" and come with no warranty unless otherwise stated.
Year: 2012
Model: F115XA
Serial #: 68VX-1140624
Shaft Length: 25"
Cosmetic Condition: 3 - Good
Running Condition: 4 - Very Good
SMI Stock#:6M2219
Year: 2012
Model: F115XA
Serial #: 68VX-1140624
Shaft Length: 25"
Cosmetic Condition: 3 - Good
Running Condition: 4 - Very Good
SMI Stock#:6M2219
Description
Amazingly versatile, these models are perfect for whatever fuels your passion for the water.
Power and Performance
- Compact, Lightweight: In-line 4-cylinder design is quiet, clean-burning and fuel efficient - with power to spare.
- 16-Valve Double Overhead Cam: Four Valves per cylinder for increased air supply and volumetric efficiency, increasing power and performance.
- Electronic Multi-Point Fuel Injection: Controlled by the ECM (Engine Control Module). Four individual fuel injectors provide the precise amount of fuel for each individual cylinder. Optimal fuel atomization provides better combustion, further enhancing performance and fuel economy.
- 10 mm Offset Crankshaft: Allows for a larger intake volume design. Four tuned intake tubes boost torque in low and mid speed ranges for quick acceleration.
- Composite Intake Manifold: The long tube intake tracks are tuned to increase air flow increasing low end and midrange torque performance resulting in a more powerful hole shot and increased acceleration. The air silencer box reduces intake air noise while the surge tank reduces air tubulence for smoother operation.
- Microcomputer Ignition: Adjusts timing to maintain optimum engine performance, economy and power under all conditions.
Reliability and Durability
- ACP-211 Paint Process: Yamaha's Exclusive ACP-211 Paint Process provides a tough, 5-layer barrier against corrosion. It's a key part of our renowned Ultimate Corrosion Protection System that's standard on all Yamaha High Power Four Stroke engines.
- 3-Year Limited Warranty: Every Yamaha Four Stroke is protected by our 3-Year Limited Warranty for pleasure use.
- Freshwater Flush Device: Allows you to flush the engine without running it, for added convenience and long-engine life.
- YDC-30 Alloy: Yamaha's exclusive YDC-30 Alloy is the most corrosion-resistant base material in the industry. Used with Yamaha's Exclusive ACP-221 Paint Process, it provides an extra-tough barrier against corrosion. They're both key components of our renowned Ultimate Corrosion Protection System that's standard on all Yamaha Midrange Four Stroke engines.
Convenience and Control
- Electronic Multi-Point Fuel Injection: Controlled by the ECM (Engine Control Module). Four individual fuel injectors provide the precise amount of fuel for each individual cylinder. Optimal fuel atomization provides better combustion, further enhancing performance and fuel economy.
- Twin Counter Balancer Shafts: Minimize engine vibration for a smooth, pleasant boating experience.
- Composite Intake Manifold: The long tube intake tracks are tuned to increase air flow increasing low end and midrange torque performance resulting in a more powerful hole shot and increased acceleration. The air silencer box reduces intake air noise while the surge tank reduces air tubulence for smoother operation.
- ACP-211 Paint Process: Yamaha's Exclusive ACP-211 Paint Process provides a tough, 5-layer barrier against corrosion. It's a key part of our renowned Ultimate Corrosion Protection System that's standard on all Yamaha High Power Four Stroke engines.
- Fuel Economy: Yamaha Four Strokes blend fuel economy with power and performance from 2.5 hp all the way to the F350 V8.
- 3-Year Limited Warranty: Every Yamaha Four Stroke is protected by our 3-Year Limited Warranty for pleasure use.
- Federal EPA Emission Requirements: Our entire four stroke line-up (except the F4 and F2.5) has earned a California C.A.R.B. three-star rating for ultra-low emissions. Our F4 and F2.5 models have earned a two-star rating for very low emissions.
- Extended Trim: Range delivers better acceleration to plane and top end speed. The tilt range is a full 70 degrees for tilting the engine above the waterline.
- Freshwater Flush Device: Allows you to flush the engine without running it, for added convenience and long-engine life.
- Multi-Function Tiller Handle: Puts easy control at your fingertips in a sleek, ergonomic new design. (Optional)
Specifications
- Engine Type: 4 cyl.
- Displacement: 106.2 ci (1741 cc)
- RPM Range: 5000-6000
- Alternator Output @ W.O.T.: 25A
- Compression Ratio: 9.7:1
- Fuel/Induction System: DOHC Fuel Injection
- Lubrication: Wet Sump
- Ignition System: TCI Micro Computer
- Starting System: Electric
- Shaft Length: 20 in., 25 in.
- Gear Ratio: 13:28 (2.15)
- C.A.R.B. Rating: 3-Star
- Weight: 414 lb (188 kg)
- Warranty: 3 Year Limited Pleasure Boat - 1 Year Limited Commercial
Warranty
- 3 Year Limited Pleasure Boat - 1 Year Limited Commercial
Standards and Options
- Engine Sensing Warning System: Standard
- Engine Stop Switch Lanyard: Optional
- Fuel Management Gauge: Optional
- Multi-Function Speedometer: Optional
- Multi-function Speedometer/Fuel Management Gauge: Optional
- Multi-Function Tachometer: Optional
- 3 Year Limited Warranty: Standard
- Ultimate Corrosion Protection System: Standard
- Electronic Fuel Injection: Standard
- External Tilt Switch: Standard
- High Output Alternator: Standard
- Micro-Computer Ignition System: Standard
- Prime Start: Standard
- Power Trim and Tilt: Standard
- Thermostatic Cooling System: Standard
- Counter Rotation: Available with or without
- Yamaha Propellers: Optional
- Remote Steering: Standard
- Freshwater Flush: Standard
- Command Link® Gauges: Optional
- New Multi-Function Tiller Handle: Optional
Engine
Engine Type | 4 cyl. |
Displacement | 106.2 ci (1741 cc) |
Starting | Electric |
Dimensions
Shaft Length | 20 in., 25 in. |
Weight | 414 lb. (188 kg) |
General
Trim Method | Power Trim and Tilt |
Shaft Rotation | Counter rotation available |
Full Throttle Operating Range | 5000-6000 rpm |
Gear Ratio / Shift | Gear Ratio: 13:28 (2.15) |
Fuel Induction | DOHC Fuel Injection |
Alternator | 25A |
Cooling | Thermostatic Cooling System |
Steering | Standard: Remote; Optional: Tiller |
Warranty | 3 Year Limited Pleasure Boat - 1 Year Limited Commercial |